How to choose and maintenance of wooden furniture

When you going to the market to buy wooden furniture, the general should take into account the overall room size and layout to determine the style of furniture and decorative surface color. And then to the appearance of the furniture product quality inspection, may refer to the following ten aspects of a comprehensive assessment:

1. Furniture functions to meet the size requirements. If the desk in the middle of Gaoyao clearance greater than 580 mm; generous headroom in the middle of 520 mm; Yi Deng's Block 420 in the high side or 440 mm; armchair in lenient with 460 mm; long coat wardrobe hanging space in tall 1350 mm; Duanda Yi hanging space in the big 850 mm; hanging space for clothes depth greater than 500 mm.

2. To go through dry timber processing, moisture content below 12%, should not be used on insects are still continuing erosion of the timber, appearance and location of the storage timber may not have the resin bag.

3. Wooden furniture should be a solid structure, not loose framework. Tenon does not allow broken, broken material. Do not buy the particleboard with a saw cut, with a nail a nail, paint with a coating of the "Trinity furniture." Do not buy without help slot, without blocking tenon, with no end of the "three noes" to produce drawer of the furniture.

4. Furniture components used in the wood-based panel should deal with the implementation of Edge, a variety of accessories may not install a small piece, missing nails, nail through.

5. Board pieces (such as doors, countertops, etc.) should be formed on the surface may not be apparent warping. Under normal circumstances, in the face of growing up in diagonal equal to 1400 mm, pieces of board warpage to allow the value of greater than or equal to 3 mm.

6. Doors and drawer switch to a flexible, two-thirds of the drawers pulled out, drop equivalent to less than 20 mm, swing around the end of less than or equal to 15 mm.

7. Wood furniture must have complete and stable performance, when the two doors open 90 degrees, light hand-pull forward, the OEM can not automatically forward tipping; bookcase door to the glass by milling processing; and Chuan Yijing To install back after the dresser, and layering the glass mirror fixed.

8. With veneer panels and other cladding materials, require tight formation, there is not allowed through plastic, degumming, bubbling.

9. Furniture should be formed on the surface film light, or color should be similar to that set of products, products not allowed to film on the surface wrinkle skin, fat and sticky paint leakage. And other products in-house finishing position should be kept clean

10. Purchase of furniture should also pay attention to the maintenance and repair. In the process of moving to avoid the bump and scratch; clothing put in before the OEM release level, so that the seam evenly divided doors, open and flexible; rocker covers the furniture, not to wet feet Dunbur collision; when the clean-up Qimian The dust, do not use chemical cleaning brightener, in Shan dust off, dried with a wet cloth together to make a little luster; the purchase of new furniture should never be placed under the sun exposure, let alone near the heating on to prevent timber Changes in the moisture content is too large and cause deformation of furniture.